Siemens MC55 AT manual BSICnum, Channnum

<BSIC>(num)

Base station identity code
2 digits, e.g. 32
00	Not decoded

<chann>(num)

ARFCN (Absolute Frequency Channel Number)

0	Not decoded. In this case, all remaining parameters related to the same chan-
	nel are neither decoded. For example, a non-existing cell appears as follows:
	000,000,0000,0000,00,0,0,-,-

<RSSI>(num)

Received signal level of the BCCH carrier (0..63). The indicated value is composed of the measured value in dBm plus an offset. This is in accordance with a formula specified in 3GPP TS 05.08

<C1>(num)

Coefficient for base station reselection, e.g. 30. In dedicated mode, under certain conditions the parameter can- not be updated. In such cases a '-' is presented.

<C2>(num)

Coefficient for base station reselection, e.g. 30. In dedicated mode, under certain conditions the parameter can- not be updated. In such cases a '-' is presented.

Note

•To some extent, the cell monitoring commands AT^MONI, AT^MONP and AT^SMONC cover the same param- eters. The receiving level, for example, can be queried with all three commands. Yet the resulting values may be slightly different, even though obtained over a time period of a few seconds. This is quite normal and noth- ing to worry about, as the cell information is permanently updated.

MC55_ATC_V04.00	Page 173 of 475	3/17/06
Confidential / Released