Siemens MC55 AT manual Atsmong Gprs Monitor, Atsmong=?, ATSMONG=table, period, Tablenum

8.10AT^SMONG GPRS Monitor

The AT^SMONG command supplies GPRS specific cell information. There are two ways to retrieve the informa- tion: once on request by using the execute command or automatically every <period> seconds by using the write command. To stop the periodic presentation type "AT" or "at".

Syntax

Test Command

AT^SMONG=?

Response(s)

^SMONG:(list of supported <table>s), (list of supported <period>s)

OK ERROR +CME ERROR

Exec Command

AT^SMONG

Response(s)

GPRS Monitor

Cell Info Table (see: Section 8.10.1, AT^SMONG Cell Info Table)

OK ERROR +CME ERROR

Write Command

AT^SMONG=<table>[, <period>]

Response(s)

^SMONG: GPRS Monitor

Cell Info Table (see: Section 8.10.1, AT^SMONG Cell Info Table)

OK ERROR +CME ERROR

Reference(s)

SIEMENS

PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last

% % % % % % ! ! !

Parameter Description

<table>(num)

1 Cell Info Table

<period>(num)

Display period in seconds

If <period> is omitted the cell data will be presented only once on a single line (as if Execute command was issued).

If <period> is given, the cell data will be listed repeatedly on 10 data lines. Every 10th data line is followed by the header, simply to repeat the column titles.

1...100

MC55_ATC_V04.00	Page 182 of 475	3/17/06
Confidential / Released