Siemens MC55 AT manual Atsind only, At+Cind

Models: MC55 AT

1 475
Download 475 pages 54.64 Kb
Page 69
Image 69

4

Any operator name stored internal to the ME (alphanumeric format, can con-

 

tain up to 16 characters).

5

Broadcast MCC-MNC (numeric format which consists of a 3-digit country code

 

plus a 2- or 3-digit network code).

If the type is 2, 4 or 5, AT+COPS with the appropriate <mode> displays the same operator name.

 

 

<mode>(num)

 

0

Indicator is deregistered, i.e. no such indicator event report (URC) will be

 

issued. <mode>=0 is power-up and factory default of indicators defined by

 

AT^SIND only.

1

Indicator is registered.

 

• Indicator event reports are controlled via AT+CMER.

 

• All indicators can be registered or deregistered via AT^SIND, but different

 

default settings apply: Power-up and factory default of the indicators sup-

 

ported by AT+CIND is <mode>=1, while, as stated above, indicators defined

 

by AT^SIND only are set to <mode>=0.

2

Query the registration status and the current value of a single indicator type.

<vmCounter>

If delivered by the network: Number of new voice messages sent as part of the Voice Message Waiting Indicator. Refer to <indDescr>.

<eonsOperator>

Operator in format which depends on the type associated to the operator name. Refer to <indValue>.

<servProvider>(str)

Service Provider Name according to the status settings (SIM Service No. 17) in the SIM Service Table (SST) of the SIM.

<nitzUT>

Universal Time delivered as part of the "nitz" Indicator. Refer to <indDescr>.

<nitzTZ>

Time Zone delivered as part of the "nitz" Indicator. Refer to <indDescr>.

<nitzDST>

Adjustment for Daylight Saving Time as part of the "nitz" Indicator. Refer to <indDescr>.

Example

Activation and use of indicator "audio":

 

AT^SIND="audio",1

You register the indicator "audio".

 

 

 

^SIND: audio,1,0

 

 

 

 

OK

You activate the Indicator Event Report with AT+CMER.

 

 

 

AT+CMER=2,,,2

 

 

 

OK

A set of all registered URCs is presented. (Please note that the example

 

 

includes the indicators registered due to the power-up default settings

 

 

of AT+CIND.)

 

 

 

+CIEV: battchg,5

 

 

 

 

+CIEV: signal,99

 

 

 

 

+CIEV: service,1

 

 

 

 

 

 

 

 

MC55_ATC_V04.00

Page 69 of 475

3/17/06

Confidential / Released

 

 

 

Page 69
Image 69
Siemens MC55 AT manual Atsind only, At+Cind