Siemens MC55 AT manual Http Post Polling Mode

Return-Path: <subscriber1@testdomain.com>

X-Original-To: subscriber1@testdomain.com

Delivered-To: subscriber2@testdomain.com

Received: from 10.10.0.132 (unknown [10.10.0.132]) by testdomain.com (Postfix) with SMTP id 379321D004

for <subscriber1@testdomain.com>; Tue, 20 Dec 2005 08:00:07 +0100 (CET) To: subscriber2@testdomain.com

Cc:

From: subscriber1@testdomain.com

Subject: TestMail

Message-Id: <20051220070007.379321D004@testdomain.com >

Date: Tue, 20 Dec 2005 08:00:07 +0100 (CET)

X-UIDL: &lL"!(Z6"!^cl!!1+%"!

Status: RO

Hallo Tom!Bye Bye Tom!	Dot indicates end of mail according to RFC 2821.
.
OK	Try to read 1000 bytes once again.
at^sisr=1,1000
^SISR: 1,-2	No more data available to read, i.e. the service has
	finished.
OK	Check the connection state of service profile 1.
at^sisi=1
^SISI: 1,6,578,0,0,0	The command response indicates that the POP3
OK	service is in state "6" (Down) and that 578 bytes have
	been retrieved.
at^sise=1	Check error status of service profile 1.
^SISE: 1,0	The command response confirms that no error
	occurred.
OK	Close the service.
at^sisc=1
OK

10.11.14HTTP POST (Polling Mode)

	at^siss=1,srvType,"Http"		Select service type HTTP.
	OK		Select connection profile 1.
	at^siss=1,conId,1
	OK		Select "Post" method.
	at^siss=1,hcMethod,1
	OK
	at^siss=1,address,"http://192.168.1.3/datafiles/dummy/dummy.txt"
	OK		Try to upload 180 bytes.
	at^siss=1,hcContLen,180
	OK		Open the service.
	at^siso=1
	OK		Send the first 100 bytes.
	at^sisw=1,100
	^SISW: 1, 100, 0
	OK		Try to send again 100 bytes.
	at^sisw=1,100
	^SISW: 1, 80, 0		80 bytes are sent.
	OK		Try to write data once again.
	at^sisw=1,40
	^SISW: 1, 0, 0		No further data available, i.e. the service has fin-
			ished.
	OK
MC55_ATC_V04.00		Page 264 of 475		3/17/06
Confidential / Released