Siemens MC55 AT manual Using the Gprs dial command ATD, By AT+CGDCONT

11.21Using the GPRS dial command ATD

Example

In addition to the GPRS AT commands you can use the "D" command to dial into to the GPRS network.

There are two GPRS Service Codes for the ATD command: Values 98 and 99.

Examples:

ATD*99#	Establish a connection by service code 99.
CONNECT
ATD*99*123.124.125.126*PPP*1#	Establish a connection by service code 99, IP
CONNECT
	address 123 and L2P = PPP and using CID 1.
	The CID has to be defined by AT+CGDCONT.
ATD*99**PPP#	Establish a connection by service code 99 and L2P
CONNECT
	= PPP.
ATD*99***1#	Establish a connection by service code 99 and using
CONNECT
	CID 1.
ATD*99**PPP*1#	Establish a connection by service code 99 and L2P
CONNECT
	= PPP and using CID 1. The CID has to be defined
	by AT+CGDCONT.
ATD*98#	Establish a connection by service code 98.
CONNECT
ATD*98*1#	Establish an IP connection by service code 98 using
CONNECT
	CID 1. The CID has to be defined by AT+CGDCONT.

MC55_ATC_V04.00	Page 300 of 475	3/17/06
Confidential / Released