MC55_ATC_V04.00 Page 89 of 475 3/17/06
Confidential / Released
4.5 ATE Enable command echo
The ATE command determines whether or not the TA echoes characters received from TE during command
state.
Syntax
Parameter Description
[0] Echo mode off
1(&F) Echo mode on
Note
• In case of using the command without parameter, <value> is set to 0.
Exec Command
ATE[<value>]
Response(s)
OK
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last
V.250 ! % % % % % ! ! !
<value>(num)(&W)(&V)