Siemens MC55 AT +CBM lengthCRLFpdu, +CBM sn, mid, dcs, page, pagesCRLFdata, +CDS lengthCRLFpdu

URC 4

<bm>=2 (PDU mode enabled):

+CBM: <length><CR><LF><pdu>

Indicates that new cell broadcast message has been received

URC 5

<bm>=2 (text mode enabled):

+CBM: <sn>, <mid>, <dcs>, <page>, <pages><CR><LF><data>

Indicates that new cell broadcast message has been received

URC 6

<ds>=1 (PDU mode enabled):

+CDS: <length><CR><LF><pdu>

Indicates that new SMS status report has been received

URC 7

<ds>=1 (text mode enabled):

+CDS: <fo>, <mr>[, <ra>][, <tora>], <scts>, <dt>, <st>

Indicates that new SMS status report has been received

URC 8

<ds>=2:

+CDSI: <mem3>, <index>

Indicates that new SMS status report has been received

Parameter Description

<mode>(num)(&W)

[0](&F)	Buffer unsolicited result codes in the TA. If TA result code buffer is full, indica-
	tions can be buffered in some other place or the oldest indications may be dis-
	carded and replaced with the new received indications.
1	Discard indication and reject new received message unsolicited result codes
	when TA-TE link is reserved (e.g. in on-line data mode). Otherwise forward
	them directly to the TE.
2	Buffer unsolicited result codes in the TA when TA-TE link is reserved (e.g. in
	on-line data mode) and flush them to the TE after reservation. Otherwise for-
	ward them directly to the TE.
3	Forward unsolicited result codes directly to the TE. TA-TE link specific inband
	technique used to embed result codes and data when TA is in on-line data
	mode. Signaling of unsolicited result codes is configured by AT^SCFG

<mt>(num)(&W)(&V)

Rules for storing received short messages depend on the relevant data coding method (refer to GSM 03.38), preferred memory storage (AT+CPMS) setting and this value.

Note: If AT command interface is acting as the only display device, the ME must support storage of class 0 mes- sages and messages in the message waiting indication group (discard message)

[0](&F)	No SMS-DELIVER indications are routed to the TE.
1	If SMS-DELIVER is stored in ME/TA, indication of the memory location is
	routed to the TE using unsolicited result code:

MC55_ATC_V04.00	Page 349 of 475	3/17/06
Confidential / Released