Siemens MC55 AT manual 12.26 AT+FTM Transmit Data, At+Ftm=?, AT+FTM=mod

12.26AT+FTM Transmit Data

The AT+FTM command causes the TA to transmit data, using one of the modulation schemes defined in Section 12.1, FAX parameters.

An ERROR response code results if the write command is issued while the modem is on-hook. The test com- mand can be used in on-hook or off-hook mode to check the modulation schemes supported by MC55.

Syntax

Test Command

AT+FTM=?

Response(s)

(list of <mod>s)

OK

Write Command

AT+FTM=<mod>

Response(s)

CONNECT

If error is related to ME functionality:

ERROR

Reference(s)

TIA/EIA-578

PIN	ASC0	ASC1	MUX1	MUX2	MUX3	Charge	 Last
!	%	!	%	!	!	!	! !

Notes

•Used for Fax Class 1 only.

•<mod>= 3 is not possible

MC55_ATC_V04.00	Page 328 of 475	3/17/06
Confidential / Released