Siemens MC55 AT 12.20 AT+FPHCTO DTE Phase C Response Timeout, At+Fphcto?, Tout, AT+FPHCTO=tout

12.20AT+FPHCTO DTE Phase C Response Timeout

The timeout value <tout> determines how long the DCE will wait for a command after reaching the end of data when transmitting in Phase C. When timeout is reached, the DCE assumes that there are no more pages or doc- uments to send.

Syntax

Read Command

AT+FPHCTO?

Response(s)

<tout>

OK

Write Command

AT+FPHCTO=<tout>

Response(s)

OK

If error is related to ME functionality

ERROR

Reference(s)

EIA PN-2388

PIN	ASC0	ASC1	MUX1	MUX2	MUX3	Charge	 Last
!	%	!	%	!	!	!	! !

Parameter Description

<tout>(num)

Timeout

Value in 100ms units 0...30(P)...255

Note

•Used for Fax Class 2 only.

MC55_ATC_V04.00	Page 322 of 475	3/17/06
Confidential / Released