Siemens MC55 AT manual Alphabetnum, AllowedInstancenum, SatProfilestr

Parameter Description

<state>(num)

MC55 Remote-SAT interface states

0	RESET
1	OFF
2	IDLE
3	PAC
4	WAIT
<Alphabet>(num)
0	GSM character set
	Input of a character requests one byte, e.g. "Y".
1	UCS2
	To display the 16 bit value of characters represented in UCS2 alphabet a 4 byte
	string is required, e.g. "0059" is coding the character "Y". For details please
	refer to ISO/IEC 10646.
<allowedInstance>(num)
0	SAT is already used on another instance (logical channel in case of the multi-
	plex protocol). Only test and read commands can be used.
1	SAT may be started on this instance via the write version of this command.

<SatProfile>(str)

SAT profile according to GSM 11.14 [22].

The profile tells the SIM Application which features (e.g. proactive commands) are supported by the SIM Appli- cation Toolkit implementation of the MC55.

<mode>(num)

1 Activate Remote-SAT

Note

•To limit the time Remote-SAT is kept in states PAC or WAIT any ongoing (but unanswered) Proactive Com- mand is automatically aborted after 10 minutes with Terminal Response "ME currently unable to process com- mand" or "No response from user" if applicable. An URC "Terminate Proactive Command" will be send to the external application in this case, too.

MC55_ATC_V04.00	Page 377 of 475	3/17/06
Confidential / Released