Siemens MC55 AT Atsmong Cell Info Table, Gprs Monitor, Bcch Pbcch PAT MCC MNC NOM RAC, # Cell #

Note

•For compatibility with earlier products and to support legacy applications, often any input character will stop the periodic output of the write command. But since this applies only in certain cases (depending on the set- tings of AT+IPR and AT+CMUX), it is recommended to always use "at" or "AT".

8.10.1AT^SMONG Cell Info Table

Example output for AT^SMONG:

GPRS Monitor
BCCH	G	PBCCH	PAT MCC		MNC	NOM	TA	RAC	# Cell #
0637	1	-	4 234		05	2	00	0B
Columns of the cell info table:
Column				Description
BCCH				ARFCN of BCCH carrier
G				GPRS available ("1") or not available ("-") in currently used cell
PBCCH				If PBCCH is present, indication of ARFCN, else ''-'' or if Frequency Hopping is used ''H''
PAT				Priority Access Threshold (GSM Rec. 04.08 / 10.5.2.37b)

0Packet access is not allowed in the cell

1Spare, shall be interpreted as "000" (packet access not allowed)

2Spare, shall be interpreted as "000" (packet access not allowed)

3Packet access is allowed for priority level 1

4Packet access is allowed for priority level 1 to 2

MCC	Mobile Country Code
MNC	Mobile Network Code
NOM	Network Operation Mode (1...3)
TA	Timing Advance Value
RAC	Routing Area Code (as hexadecimal value)

MC55_ATC_V04.00	Page 183 of 475	3/17/06
Confidential / Released