Siemens MC55 AT manual Mptynum, Numberstr, Typenum

3	Voice followed by data, voice mode (only in connection with single numbering
	scheme AT+CSNS)
4	Alternating voice/data, voice mode (only in connection with single numbering
	scheme AT+CSNS)
5	Alternating voice/fax, voice mode (only in connection with single numbering
	scheme AT+CSNS)
6	Voice followed by data, data mode (only in connection with single numbering
	scheme AT+CSNS)
7	Alternating voice/data, data mode (only in connection with single numbering
	scheme AT+CSNS)
8	Alternating voice/fax, fax mode (only in connection with single numbering
	scheme AT+CSNS)
9	Unknown
<mpty>(num)
0	Call is not one of multiparty (conference) call parties
1	Call is one of multiparty (conference) call parties

<number>(str)

Phone number in format specified by <type>

<type>(num)

Type of address octect
145	Dialing string <number> includes international access code character '+'
129	Otherwise

<alpha>(str)(+CSCS)

Alphanumeric representation of <number> corresponding to the entry found in phonebook; used character set should be the one selected with command AT+CSCS (Select TE Character Set).

The maximum displayed length of <alpha> is 16 characters. If <alpha> has more than 16 characters, only the first 15 characters are displayed. To indicate an overflow, a special character will be used as the 16th character. This is a space if the character set selected with AT+CSCS is 'GSM', or 'E400' if the character set is 'UCS2'.

Due to time constraints on the necessary evaluation of the phonebook, this parameter may show a default value in early call phases (e.g. for <stat>= ''dialing'', ''incoming'' or ''alerting''), even if a phonebook entry is present for the number concerned.

Note

•Teleservices other than voice, data, fax are not fully supported by ME. They are used only in connection with the handling for AT+CSNS, and may therefore occur in parameter <mode> for mobile terminated calls.

MC55_ATC_V04.00	Page 148 of 475	3/17/06
Confidential / Released