Siemens MC55 AT manual 12.4 AT+FBOR Query data Bit Order, At+Fbor=?, At+Fbor?, Bor

12.4AT+FBOR Query data Bit Order

This command queries the bit order for the receive mode. The mode is set by the ME depending on the selected Service Class, see "AT+FCLASS Fax: Select, read or test service class".

Syntax

Test Command

AT+FBOR=?

Response(s)

(list of supported <bor>s)

OK

Read Command

AT+FBOR?

Response(s)

<bor>

OK

Write Command

AT+FBOR=<bor>

Response(s)

OK

Reference(s)

EIA PN-2388

PIN	ASC0	ASC1	MUX1	MUX2	MUX3	Charge	 Last
!	%	!	%	!	!	!	! !

Parameter Description

<bor>(num)

bit order modes
0	Direct bit order for both Phase C and for Phase B/D data.
[1]	Reversed bit order for Phase C data, direct Bit Order for Phase B/D data.

Note

•Used for Fax Class 2 only.

MC55_ATC_V04.00	Page 306 of 475	3/17/06
Confidential / Released