Siemens MC55 AT manual Atsiss Internet Service Setup Profile, SrvParmTag

10.3AT^SISS Internet Service Setup Profile

AT^SISS serves to set up the necessary parameters in the Internet service profiles. Any service profile can then be used to control a data link in conjunction with AT^SISI, AT^SISO, AT^SISC, AT^SISR, AT^SISW and

AT^SISE.

The AT^SISS read command requests the current settings of all Internet service profiles. One line is issued for every possible parameter of a given <srvParmTag> "srvType" value.

The AT^SISS write command specifies the parameters for a service profile identified by <srvProfileId>. At first the type of Internet service needs to be selected via <srvParmTag> value "srvType". This determines the applicability of all other <srvParmTag> values related to this "srvType" and sets their defaults. Changing the <srvParmTag> "srvType" of an existing service profile will reset all <srvParmTag> default values to suit the new "srvType". An exception is the <srvParmValue-alphabet>which can be set before or after selecting "srvType" and is not reset when "srvType" changes.

To change the settings the write command needs to be executed for each single <srvParmTag>. All profile parameters set with AT^SISS are volatile.

The list below shows which <srvParmTag> parameters apply to each Internet service and which of them are mandatory or optional.

Table 10.2: Applicability of AT^SISS <srvParmTag> values

	<srvParmTag>	Mandatory or optional
	Socket service
	"srvType"	mandatory
	"conId"	mandatory
	"alphabet"	optional
	"address"	mandatory
	"tcpMR"	optional
	"tcpOT"	optional
	FTP service
	"srvType"	mandatory
	"conId"	mandatory
	"alphabet"	optional
	"address"	mandatory
	"tcpMR"	optional
	"tcpOT"	optional
	HTTP service
	"srvType"	mandatory
	"conId"	mandatory
	"alphabet"	optional
	"address"	mandatory
	"user"	optional
	"password"	optional
	"hcContent"	optional
	"hcContLen"	optional
MC55_ATC_V04.00		Page 228 of 475	3/17/06
Confidential / Released