Siemens MC55 AT manual MC55ATCV04.00 232 17/06 Confidential / Released

Parameter "port" (optional):

0: Port number will be assigned from service (default).

1 ... 216-1: defines the local port number for the UDP client.

2.FTP

-FTP client URL (get) "ftp://'user':'password'@'host':'tcpPort'/'url-path' [;type='aid'] " Refer "IETF-RFC 1738".

-FTP client URL (put)

"ftpput://'user':'password'@'host':'tcpPort'/'url-path'/'element name' [;type='ai'][;mode='uad'] "

Used parameters:

"host" is mandatory, all other parameters are optional. If "password" is set then "user" must be set as well.

If "user" is omitted the string "anonymous" is selected for "user" and "pass- word".

If "password" is omitted the password request is served by an empty string. If "tcpPort" is omitted the service connects to the FTP default port 21.

If "url-path" contains only the IP address a directory listing is requested.

If "url-path" contains the IP address and has a slash '/' appended a detailed directory listing is requested.

"type": [a)scii i)mage d)irectory]

"mode": [u)nique a)ppend d)elete]

"u)nique" selects the FTP Store Unique command to create a file name unique to the current directory. If the file name is assigned by the server then the "^SIS" URC will appear, indicating <urcInfoId> 2100 and the file name.

"d)elete" clears given 'element name'.

If "mode" is omitted "replace mode" is default setting.

3. HTTP

		HTTP client URL
		Length: 6 ... 255
		"http://'server'/'path':'tcpPort' "
		"server": FQDN or IP-address
		"path": path of file or directory
		"tcpPort": If parameter is omitted the service connects to HTTP default port
		80.
		Refer to "IETF-RFC 2616".
		4. SMTP SMTP server address (string).
		Length: 4 ... 256.
		5. POP3 POP3 server address (string).
		Length: 4 ... 256.
	hcContent	Optional parameter for HTTP method "Post".
		Length: 0 ... 127
		Can be used to transfer a small amount of data. The content of this string will
		only be sent if "hcContLen" = 0. The maximum length of "hcContent" is 127
		bytes.
		To transmit a larger amount of data "hcContLen" must be set to a non-zero
		value. In this case the "hcContent" string will be ignored, and data transmission
		from the client to the server is done with AT^SISW.
	hcContLen	Mandatory parameter for HTTP method "Post".
		Length: 0 ... 231-1
		The content length shall be set in the header of the HTTP "Post" request before
		the data part is transferred.
		If "hcContLen" = 0 then the data given in the "hcContent" string will be posted.
		If "hcContLen" > 0 then the AT^SISW command will be used to send data from
		the client to the server. In this case, "hcContLen" specifies the total amount of
		data to be sent. The data can be sent in one or several parts. For each part,
		the transmission is triggered by the URC "^SISW: x, 1", then the AT^SISW write
		command can be executed. After the exact number of bytes are transferred via
MC55_ATC_V04.00		Page 232 of 475	3/17/06
Confidential / Released