Canon MD130, MD140, MD150, MD160 The Wireless Controller, Adjusting the LCD Screen, NOTES, Preparations, 4Fasten the grip belt, Inserting the Battery, 3Adjust the viewfinder

3Adjust the viewfinder.

Keep the LCD panel closed to use the viewfinder and adjust the dioptric adjustment lever as necessary.

4Fasten the grip belt.

Adjust the grip belt so that you can reach the zoom lever with your index finger, and the start/stop button with your thumb.

Getting Started 21

Point the controller at the camcorder’s remote sensor when you press the buttons.

NOTES

The wireless controller may not work properly when the remote sensor is situated under strong light sources or direct sunlight.

If the wireless controller does not work, check that [WL.REMOTE] is not set to [OFF ]

( 41). Otherwise, replace the battery.

The Wireless Controller

Inserting the Battery

(Lithium Button Battery CR2025)

Tab

Adjusting the LCD Screen

Rotating the LCD Panel

Open the LCD panel 90 degrees. You can rotate the panel 90 degrees downward.

180°

Preparations

1Press the tab in the direction of the arrow and pull out the battery holder.

2Place the lithium button battery with the + side facing up.

3Insert the battery holder.

Using the Wireless Controller

90°

You can rotate the panel 180 degrees toward the lens (allowing the subject to monitor the LCD screen while you use the viewfinder). Rotating the panel 180 degrees is also useful if you wish to include yourself when recording with the self timer.