66Connecting to a TV or VCR

1Locate the scene you wish to start audio dubbing.

Before locating the starting point, you can also set the zero set memory

( 31) at the point where you want the audio dubbing to end. The camcorder will automatically stop audio dubbing at that point.

2Press PAUSE .

3Press AUDIO DUB. .

“AUDIO DUB.” and appear.

4Press PAUSE to begin dubbing.

• Audio device: Begin playback.

•Microphone: Speak into the microphone.

5 Press STOP to stop dubbing.

Audio device: Stop playback.

 

IMPORTANT

 

Audio dubbing will stop if the tape has a blank

section or a section recorded in LP mode or

[

16bit] audio.

You cannot use the DV terminal for audio dubbing.

The quality of the dubbed sound will not be as good when dubbing audio to a tape that was not recorded with this camcorder or after having dubbed audio over the same scene more than 3 times.

NOTES

While dubbing audio using the built-in microphone: You can connect the camcorder to a TV to check the picture on the TV screen and check the sound through headphones connected to the TV.

While dubbing audio using an external audio device: You can check the picture on the camcorder's LCD screen and the sound through the built-in speaker or the audio device.

TO SELECT THE AUDIO TRACK FOR PLAYBACK

You can select the audio track that will be played when playing back a tape that was audio dubbed ( 49).