External Connections

This chapter explains step-by-step how to connect your camcorder to an external device such as a TV, VCR, or computer.

Connecting to a TV or VCR

Open the LCD panel to access.

AV Terminal

Sound from the built-in speaker will be muted while the STV-250N Stereo Video Cable is connected to the camcorder.

DV Terminal

•Check the type and orientation of the terminal and make sure you connect the DV cable properly.

•Use the optional CV-150F (4 pin-4 pin) or CV-250F (4 pin-6 pin) DV cable.

Attaching the Ferrite Core

Attach the enclosed ferrite core before you connect the STV-250N Stereo Video Cable to the camcorder.

Attach the ferrite core to the cable about 10 cm from

 

the plug end (the plug to be connected to the

10 cm

camcorder) of the STV-250N Stereo Video Cable.

Pass the cable through the centre of the core and wrap it around the core, then close the unit until it clicks shut.

46