Preparations

TO USE THE WIRELESS CONTROLLER

Point the controller at the camcorder’s remote sensor when you press the buttons.

You can rotate the LCD panel 180 degrees to use the wireless controller from the front of the camcorder.

NOTES

The wireless controller may not work properly when the remote sensor is situated under strong light sources or direct sunlight.

If the wireless controller does not work, check that [WL.REMOTE] is not set to

[OFF ] ( 57). Otherwise, replace the battery.

Accessories

Fasten the grip belt.

Adjust the grip belt so that you can reach the zoom lever with your index finger, and the Start/Stop button with your thumb.

WHEN YOU MOUNT THE CAMCORDER ON A TRIPOD

Do not leave the viewfinder exposed to direct sunlight as it may melt (due to concentration of the light by the lens). Do not use tripods with fastening screws longer than 5.5 mm. Doing

so may damage the camcorder.

18