Set the Machine for Receiving Faxes
Select the Receive Mode that Suits Your Needs
Follow the chart below to determine the correct receive mode for your needs.
Set the Receive Mode
1 Press [Additional | 2 Use [ |
| ] or [ | ] to | 3 Use [ |
| ] or [ | ] to |
|
| |||||||
Functions]. | select <4 FAX SETTINGS>, | select <3 RX SETTINGS>, | ||||||
| then press [OK]. |
| then press [OK]. |
| ||||
Do you intend to use the machine to receive voice calls?
Yes
Do you intend to use an answering machine with the machine?
No
No <FaxOnly>
Answers all calls as faxes.
Yes <AnsMode>
Receives faxes automatically and records voice messages.
4 Use [
] or [
] to select <4 RX MODE>, then press [OK].
5 Use [ |
| ] or [ | ] to | 6 Press [Stop/Reset] to |
| ||||
select the receive mode, | return to standby mode. | |||
then press [OK]. |
|
| ||
Do you intend to receive faxes | No |
automatically? |
|
Yes |
|
Do you subscribe to a DRPD service? | No |
|
Yes
NOTE
<MANUAL>
Does not answer any calls. You have to manually receive faxes.
<FAX/TEL>
Switches between fax and voice calls automatically if a telephone is connected to the machine.
<DRPD>
Distinguishes between fax and voice calls, if you want to use extension phones.
NOTE
For <AnsMode>, make sure an answering machine is connected to the machine.
NOTE
For details, see Chapter 1, “Setting the Receive Mode” in the Advanced Guide.
–The answering machine must be connected directly to the machine for <AnsMode> to work.
–Voice mail is not supported with <AnsMode>.
–The <DRPD> mode requires subscription to a DRPD (Distinctive Ring Pattern Detection) service. Contact your telephone company for availability.
19 | 20 |