Set Up the Paper Cassette and Load Paper
1 | 2 | 3 | 4 |
|
|
| A |
|
|
| B |
|
|
| B |
|
|
| A |
|
|
| A |
Insert the output tray into the front slot on the machine.
Pull out the paper cassette completely.
CAUTION
Pull the paper cassette straight/forward. Pulling it at an angle may damage the paper sensing lever inside the machine.
Attach the cassette extension to the paper cassette. The slots (A) are keyed and must be inserted at a 90° angle. Once inserted, fold the extension (B).
Pinch and slide the rear paper guide (A) to match the size of paper (B).
NOTE
Confirm that the rear paper guide is fitted in the paper size slit correctly.
5 | 6 |
B |
|
| A |
A |
|
NOTE
To load
Fan the paper stack and even the edges.
Load the paper into the paper cassette with the print side down. Make sure the paper stack sits below the hooks (A) on the rear paper guide.
7 | 8 |