7 Adjust the paper guide rail to match the size of paper.

8 Aligning the protrusions (A) on the both sides of the dust cover to the guides (B) inside the machine, set the dust cover.

2 Set Up the Machine

9 Attach the document feeder tray on the document feeder.

–The default paper size/type is set to <LTR> and <PLAIN PAPER> in the setting menu. When you load other size and/or type of paper, change the paper size/type setting

by pressing [Paper Settings]. For details, see “Introduction of the Machine,” in the e-Manual.

–For loading paper in the multi-purpose tray, see “Introduction of the Machine,” in the e-Manual.

–If a printout falls out of the output tray, extend the output tray extension on the front side of the machine and set the paper stopper upright.

11