3 Make Fax Settings
Set Date and Time
Before using the machine, you MUST set the current date and time. The current date and time settings are used as standard timer settings for functions that require them.
●Entering Information
‒Use 
–
‒Press [
] or [
] to move the cursor position.
‒Press [OK] to confirm the entry.
‒Press 
[Clear] to delete entire entry.
●The display turned OFF:
The machine may enter the Sleep mode while you are performing setup. Press 
[Energy Saver] to turn the display back ON and continue the setup.
1
2 Press [ |
| ] or [ ] to select <8 TIMER | |
| |||
SETTINGS>, then press [OK]. | |||
|
| ||
| M E N U | ||
| 8 |
| T I M E R S E T T I N G S |
|
|
|
|
3 Confirm that <1 DATE&TIME SETTING> is displayed, then press [OK].
T I M E R S E T T I N G S
1 | D A T E & T I M E S E T T I N G |
4 Use 
–
Ex.
D A T E & T I M E S E T T I N G
1 5 : 5 0 | 0 7 3 1 ’ 0 8 |
If you accidentally enter an incorrect number, press [
] or [
] to move the cursor to the number that needs correction and overwrite it.
5 Press 
[Stop] to return to the standby mode.
–You can select one of the following three date formats in <2 DATE TYPE SELECT>.
<MM/DD/YYYY> <DD/MM YYYY> <YYYY MM/DD>
–By default, <4 DAYLIGHT SV. TIME> in the <8 TIMER SETTINGS> menu is set to <OFF>.
–If you want to set <4 DAYLIGHT SV. TIME> in the <8 TIMER SETTINGS> menu to <ON>, see “Introduction of the Machine,” in the
16