5 Set Up Computers and Software

USB Connection

Before Installation

•The following procedures are explained using sample screens from Windows XP Professional.

•The screen may differ according to the operating system, as well as the type and version of the printer driver.

•Do not connect the USB cable before installing the software. If you connect the USB cable before installing the software and the Found New Hardware Wizard screen appears, click [Cancel].

•For Windows 2000/XP/Vista, log on as an Administrator to install the software.•Make sure the machine is turned ON before connecting the USB cable.

•Click on the circled button on each screen to proceed to the next step.

•A USB cable is not included with the machine.
MF Drivers & MF Toolbox Installation

1

Insert the User Software CD-ROM.

2

Windows Vista: click [Start] on the Windows task bar → [Computer]. Windows 2000: double-click [My Computer] on the Windows desktop.

Open the CD-ROM icon, then double-click [MInst] ([MInst.exe]).

3

4

If the disk space is insufficient to install the software, an error message is displayed. Free the disk space, and then try again.

5

6

If the CD-ROM Setup screen is not displayed, click [start] on the Windows task bar → [My Computer].

31