5 Press [(-)] or [(+)] to select <SUBNET MASK> ➞ press [Set].

6 Enter the number using the numeric keys ➞ press [Set].

7 Press [(-)] or [(+)] to select <DEFAULT GATEWAY> ➞press [Set].

8 Enter the number using the numeric keys ➞ press [Set].

9 Press [(-)] or [(+)] to select <ETHERNET DRIVER> ➞ press [Set].

10 Press [(-)] or [(+)] to select <AUTO> or <MANUAL>.

●If you want to specify the ethernet driver settings automatically:

❑Select <AUTO> ➞press [Set].

●If you want to specify the ethernet driver settings manually:

❑Select <MANUAL> ➞ press [Set].

❑Press [(-)] or [(+)] to select <DUPLEX> ➞press [Set].

❑Press [(-)] or [(+)] to select <HALF DUPLEX> or <FULL DUPLEX> for specifying the desired communication mode ➞press [Set].

❑Press [(-)] or [(+)] to select <ETHERNET TYPE> ➞press [Set].

❑Press [(-)] or [(+)] to select <10 BASE-T> or <100 BASE-TX> for specifying the desired ethernet type ➞ press [Set].

11 Press [Stop/Reset] to return to the standby display.

2

Specifying the Network Settings

Preparation for Protocol Settings

2-5