3 Execute the applicable command below to set the IP address for the network board.

ping <IP Address> -l 479

Input Example: ping 172.20.88.125 -l 479

NOTE

•The character “-l” is the alphabet letter “L.”

•The Subnet Mask and Gateway Address are set as <0.0.0.0>.

The preparation for the machine’s protocol settings is complete.

Settings Using NetSpot Device Installer

The following is the procedure for specifying the settings using NetSpot Device Installer.

1 Insert the CD-ROM supplied with the printer into the CD-ROM drive.

2 Double-click the [My Computer] icon on the screen ➞ right-click the CD-ROM drive icon ➞ click [Open] on the pop-up menu.

3 In the [NetSpot_Device_Installer] folder on the CD-ROM, run [nsdi.exe].

4 From the list, select the device whose [Device Name] is the MAC address of the printer with <Not Configured> displayed in [Status].

2

Specifying the Network Settings

Preparation for Protocol Settings

2-7