[Subnet Mask]: | Enter the subnet mask used for the TCP/IP network. |
[Broadcast Address]: | Enter the broadcast address used for the TCP/IP |
| network. |
NOTE
•The settings for [IP Address], [Gateway Address], [Subnet Mask], and [Broadcast Address] cannot be entered if [DHCP] is selected from [IP Address Settings with].
•If a DHCP server cannot be used, select [Manual Setting] from [IP Address Settings with].
8 Confirm the settings you specified ➞ click [OK].
9 When the following message box appears, click [OK].
The settings are enabled after a short time.
The preparation for the machine’s protocol settings is complete.
2
Specifying the Network Settings
Preparation for Protocol Settings |