Preparing the Machine

Be sure to read your setup sheet first for setting up your machine and getting it ready for use.

Unpack the machine

Please confirm the included items against the illustration printed on the lid of the packing box.

Important

A USB cable is necessary to connect the machine with your computer.

1 Turn on the machine.

Caution

Be sure to remove the tapes and protective material before you turn on the machine.

Note

zThe tape or the protective material position is subject to change.

zIf an unintended language is displayed on the LCD, press the Back button to return to the LANGUAGE SETTING screen.

2 Prepare the FINE Cartridges.

Caution

zDo not touch internal parts other than the FINE Cartridge Holder.

zDo not drop or shake FINE Cartridges as this may cause the ink to leak out and stain your clothes and hands.

Important

zIf the Scanning Unit (Printer Cover) is left open for more than 10 minutes, the FINE Cartridge Holder moves to the right side. Close and reopen the Scanning Unit (Printer Cover) to return the holder to the left.

zDo not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge. The machine may not print out properly if you touch it.

zDo not reattach the protective tape once it has been removed.

zHandle the removed protective tape carefully to avoid getting your hands dirty or staining surrounding work area.

3 Install the FINE Cartridges.

Be sure to use the machine with both Black and Color FINE Cartridges.

Otherwise, the machine cannot print. When either of ink runs out while printing, you can select to use either Color or Black ink as a printer driver setting. However you must use the machine with both Black and Color FINE Cartridges installed regardless of the printer driver setting.

Important

zMake sure that all the FINE Cartridges are installed in the correct position. The machine cannot be used unless all the FINE Cartridges are installed.

zOnce you have installed the FINE Cartridges, the message “CART. RETURN” is displayed on the LCD. Wait until the copy standby screen is displayed before proceeding. It takes about one to two minutes.

Note

An error message will be displayed on the LCD if a FINE Cartridge is not installed properly. Open the Scanning Unit (Printer Cover) and make sure that position of all the FINE Cartridges is appropriate.

4Preparing the Machine