Users in Asia
zScan Soft OmniPage SE can be installed only on an English operating system.
Information for Macintosh
zSince Mac® OS 9, Mac OS X Classic environments, or Mac OS X v.10.2.7 or earlier are not supported, do not connect the machine to these.
zDo not remove or insert the USB cable during installation, as this may result in the computer or machine not operating normally.
zBefore installing the MP Drivers, disable all
When using Mac OS X v.10.2.8 to v.10.3.x:
zBefore using the Operation Panel on the machine to save originals scanned from the Platen Glass to the computer, it is necessary to select MP Navigator EX 1.0 or MP Navigator EX 1 as the launch application on Image Capture under Applications. For details, refer to “Scanning Images” in the User’s Guide
When using Mac OS X v.10.2.8 to v.10.3.3:
zRestarting the computer while connected to the machine may cause the machine not to be detected. To resolve this, either unplug the USB cable then plug it back in again, or turn the machine off then back on again.
Users in Asia
zTo install the User’s Guide
Installing the MP Drivers | 7 |