Canon MV5, MV5i, MV5i MC Selecting audio output channels

104
E
Editing
When you play back a tape whose audio has been recorded on multiple channels,
you can change the output channels of that sound.
1. Load a tape recorded with multiple-channel audio.
2. Open the menu and select VCR SET UP. Then select OUTPUT CH,
set it to the desired setting and close the menu.
• Refer to the following list.
Selecting audio output channels
OUTPUT CH•••L/RVCR SET UP
( 39)
CAMERA PLAY (VCR)CARD CAMERA
MV5i MC
CARD PLAY (VCR)
MV5i MC
OUTPUT CH setting Tape recorded with
stereo sound
Playback sound
L+R channels main + subL/R
L/L L channel only main only
R/R R channel only sub only
Tape recorded on
multiple channels
#4_MV5/MV5i/MV5i MC_E(85-105) 02.4.17 7:16 PM Page 104