153
E
Additional
Information
DANGER!
Treat the battery pack with care.
• Keep it away from fire (or it might explode).
• Do not expose the battery pack to temperatures greater than 60°C (140°F).
Do not leave it near a heater,or inside a car in hot weather, for example.
• Do not try to disassemble or modify it.
• Do not drop or knock it.
• Do not get it wet.
WARNING!
• The battery used in this device may present a fire or chemical burn hazard if
mistreated. Do not recharge, disassemble, heat above 100°C (212°F) or
incinerate.
• Replace the battery with a CR1616 made by one of the following companies:
Panasonic, Hitachi Maxell,Sony, Toshiba, Varta,Renata. Use of other
batteries may present a risk of fire or explosion.
• The used battery should be returned to the supplier for safe disposal.
Cautions:
• Do not pick up the battery using tweezers or other metal tools — this will cause
a short circuit.
• Wipe the battery with a clean, dry cloth to ensure proper contact.
• Keep the battery pack out of reach of children — if it is swallowed, contact a
physician immediately,as the battery case may break down and the battery
fluids damage the stomach and intestines.
• Do not disassemble, heat or immerse the battery in water, to avoid the risk of
explosion.
Installing the backup battery
Press the small button with a pen and pull out the
battery holder. Insert the battery into the battery
holder so that the + side of the battery faces the +
sign on the battery holder. Insert the battery
holder back into place.
This backup battery allows the camcorder to
remember the date and time and other settings
when main power source is removed. It has a life
span of about a year.
When it needs replacing (or if it has not been
installed), the ymark flashes in the display.
Remove the old battery by pushing up then releasing and lifting out. Make sure to
attach a power source to the camcorder first,so it will remember your chosen
settings when you change the battery.
#6_ MV5/MV5i/MV5i MC_E(150-180) 02.4.17 7:20 PM Page 153