112
E
Using a Memory Card
MV5i MC
Recording Still Images onto a Memory Card
1
2
4
3
You can record still images onto a memory card. In addition to the still images
you record directly onto the memory card, you can record images from a tape in
the camcorder,or images input via the DV terminal or AV terminal onto the
memory card.
• When you are using an SD Memory Card, make sure the protect switch is set to
allow recording.
• Make sure a memory card with enough memory available is inserted into the
camcorder.
• While the card access indicator flashes, do not disconnect the power source or
remove the memory card. Doing so could result in data damage.

1. Press and hold the small button on the POWER switch and turn

the POWER switch to CAMERA.

2. Move the TAPE/CARD switch to CARD.

• The number of images that can still be recorded on the memory card, and
other information appear in the display.
• The camcorder will turn itself off if you are using a battery and do not
operate the camcorder for more than 5 minutes. Set the POWER switch to
OFF and then back to CAMERA.

3. Press the PHOTO button halfway and hold it.

• Exposure is locked.
• During autofocus Fflashes white in the display as the camcorder adjust the
focus and it is displayed continuously as a green mark when the camcorder
is ready to take the still image.
#5_ MV5/MV5i/MV5i MC_E(106-149) 02.4.17 7:18 PM Page 112