81
E
Using the Full
Range of Features
You can also choose to display camcorder data (shutter speed and exposure
settings) in the data code.
DATA CODE•••DATE/TIME
DISP.SET UP
( 39)
Setting the data code
Date/Time Camera data Date/Time &
Camera data
Time
Date & Time
Date
DATA CODE
(tape only)
D/TIME SEL.
F11
1/250
F11
1/250
1.JAN.2002
12:00:00 AM
12:00 AM
1.JAN.2002
F11
1/250
F11
1/250
1.JAN.2002
F11
1/250
12:00:00 AM
F11
1/250
12:00 AM
1.JAN.2002
Notes:
• The data code will read “– – –” in the following situations:
– During playback of a blank section of tape.
– If the tape was recorded before entering the date and time in the camcorder’s
memory.
– If the tape was recorded on a camcorder without a data code function.
– If noise or tape damage prevents the data code from being read.
• If a recording made on MV5/MV5i/MV5i MC is played back on a different DV
camcorder,the data code may not be displayed correctly.
• The data code will appear in the display even if DISPLAYS ( 165) has been
set to OFF through the menu.
Possible data code combinations for tapes:
To change,open the menu and select DISP.SET UP. Then select DATACODE, set it to DATE/TIME,CAMERA DATA or CAM. & D/T andclose the menu.
CAMERA PLAY (VCR)CARD CAMERA
MV5i MC
CARD PLAY (VCR)
MV5i MC
#3_ MV5/MV5i/MV5i MC_E(38-84) 02.4.17 7:15 PM Page 81