86
E
Editing

MV 5

Dubbing to/from a Tape with Digital Video Equipment
Digital video equipment fitted with the DV terminal allows you to edit,copy
and transfer data digitally,with virtually no loss in image and sound quality.
1. Connect the camcorder and the other digital device.
• Connect the CV-150F DV cable (optional) with the sides of the plugs
marked with the arrows facing as shown above.
2. Prepare the other device.
• Turn on the power and load a blank cassette.
3. Turn the camcorder’s POWER switch to PLAY (VCR) and load
a recorded cassette.
1. Find a point on your recorded tape slightly before the section
you want to dub.
2. Press the camcorder’s PLAY button.
• Playback starts.
3. Start recording on the other device as the section you want to
copy appears on the screen.
4. When you get to the point where you want to stop dubbing,
press the STOP button or the PAUSE button.
Notes:
• Blanks between recordings on the playback tape are recorded as anomalous
images on the tape that is being recorded to.
• It is not possible to add digital effects during DV dubbing.
Dubbing from a Cassette with Digital Video Equipment
Preparations
Dubbing
Side with arrow
:Signal flow
#4_MV5/MV5i/MV5i MC_E(85-105) 02.4.17 7:16 PM Page 86