90
E
Editing
OUTPUT
VIDEO
S(S1)-VIDEO
AUDIO
L
R
REW
PLAY
REC
PAUSE
SEARCH
SELECT
ZERO SET
MEMORY
AUDIO
DUB.
STOP
AV
INSERT
PAUSE
SLOW
– /
1. Connect the camcorder to the VCR.
2. Prepare the device.
• Set the TV/Video selector on the television to Video. For further details, see
“Connections for Playback on a TV Screen” on p. 33.
• Turn on the VCR. Load your recorded cassette, and put the VCR in playback
pause mode.
• See your TV and VCR instruction manuals for details.
3. Turn the camcorder’s POWER switch to PLAY(VCR) ( and
move the camcorder’s TAPE/CARD switch to TAPE).
4. Load a blank cassette.
MV5i MC
Example recording from a VCR
Preparations
S-150 S-video Cable
STV-250N Stereo Video Cable
:Signal flow
Recording from a VCR,TV or AnalogCamcorder (Analog Line-in)MV5i/MV5i MC
You can record a video played on your VCR or analog camcorder (for digital
camcorders, see p. 86) or a TV program onto a tape in the MV5i/MV5i MC, if the
TV or other device has audio/video outputs.
• If an anomalous signal is sent from the TV or VCR, the images recorded on the
tape may also be anomalous (although it may not appear so on the TV image),
not recorded at all, or COPYRIGHT PROTECTED DUBBING RESTRICTED
may appear in the display.
• You are unable to dub tapes recorded with the copyright protective signal.
• For higher picture quality, we recommend using the S-150 S-video cable when
doing analog line-in recording.
You cannot use headphones while doing analog line-in recording. If you have the
AV/headphones terminal set to headphones,it will automatically switch to AV for
analog line-in recording. PHONES disappears from the display.
#4_MV5/MV5i/MV5i MC_E(85-105) 02.4.17 7:16 PM Page 90