10 The Installation completed successfully screen appears.

If only one CD-ROM is included in the package for the Windows setup

Click Exit.

The Setup CD-ROMwill be ejected.

If it is not ejected automatically, remove it manually.

If Restart is displayed, make sure that the Restart the system now (recommended) check box is selected, then click Restart. After the computer restarts, remove the Setup CD-ROM.

Note

Keep the CD-ROM in a safe place in case you need to reinstall the software.

If two CD-ROMs are included in the package for the Windows setup

When the Continue to Windows CD-2 screen appears, perform the following steps (1) to (3) to complete the installation.

(1)Click Exit.

The Setup CD-ROMwill be ejected.

If it is not ejected automatically, remove it manually.

If Restart is displayed, make sure that the

Restart the system now (recommended) check box is selected, then click Restart. After the computer restarts, remove the Setup CD- ROM.

(2)Insert the Setup CD-ROM“Windows (CD-2) Macintosh”.

(3)Follow the on-screen instructions to proceed with the setup.

After installation is complete, the Setup CD- ROM will be ejected.

If it is not ejected automatically, remove it manually.

Note

Keep the CD-ROMs in a safe place in case you need to reinstall the software.

When using Windows Vista:

To use the Card Slot over network, mount the Card Slot using the Canon IJ Network Tool after software installation is complete. For details, refer to “Using the Card Slot over a Network” in the User’s Guide on-screen manual.

10Setting Up the Machine and the Computer (Windows)