2-2 Setting Up an Additional LAN-connected

Computer

(continued from step 9 on page 5)

 

 

Important

To set up an additional LAN-connected computer, the necessary software must be installed on the additional computer. See “1 Preparing for Setup” on page 2 and “2 Installing the Software” on page 3 to confirm that the software installation is complete, then proceed with the procedure below.

1 Make sure that the machine is connected to the network device with a LAN cable, then turn on the machine.

When you turn on the machine, the COPY button flashes green, then remains lit.

Note

zIf MAC address filtering is configured to restrict access to the machine, make sure beforehand to register the address of the computer you are setting up. To register the address, use the Canon IJ Network Tool on the computer that has already been set up.

zMake sure that the computer you are setting up is not connected to the machine with a USB cable. This setup procedure does not involve connecting the USB cable.

2 On the Setup Method screen, select Set up only the computer for network use, then click Next.

The machine connected to the network is detected automatically.

Setting Up the Machine and the Computer (Windows)

11