2 Installing the Software

Note

If the Found New Hardware or Found New Hardware Wizard screen appears automatically during the installation process, remove the USB cable connected to your computer. Click Cancel to quit the screen. In Windows Vista, the screen may close automatically when the USB cable is unplugged. Then turn off the machine and proceed from step 3 to install the software.

1 Turn off the machine.

Note

Confirm that all the lamps on the Operation Panel have gone out.

2

3

Turn the computer on and start Windows.

Insert the Setup CD-ROM.

The setup program should run automatically.

If the setup program does not run automatically, see “Installation does not start automatically when the Setup CD-ROMis inserted into your computer’s disc drive.” in “Cannot Install the MP Drivers” on page 31.

In Windows Vista, go to step 4.

In Windows XP and Windows 2000, go to step 6.

Important

If two CD-ROMs are included in the package for the Windows setup, insert the Setup CD-ROM“Windows (CD-1)”.

Note

zIf the Select Language screen appears, select a language, then click Next.

zIf the Select Your Place of Residence screen appears, select your place of residence, then click Next.

Setting Up the Machine and the Computer (Windows)

3