11 When the Installation completed

successfully screen appears, click Restart.

The software installation is complete.

When the computer restarts, the Canon IJ Network Tool will start up automatically. Proceed with the network setup from following step 12.

After the computer restarts, remove the Setup CD- ROM.

Note

Keep the CD-ROM in a safe place in case you need to reinstall the software.

When using Mac OS X v.10.3.9:

Restarting the computer while connected to the machine may cause the machine not to be detected. To resolve this, either unplug the USB cable then plug it back in again, or turn the machine off then back on again.

Note

When using Mac OS X v.10.3.9, before using the Operation Panel on the machine to save scanned originals to the computer, it is necessary to select MP Navigator EX as the launch application on Image Capture under Applications. For details, refer to “Scanning Images” in the User’s Guide on-screen manual.

Setting Up the Machine and the Computer (Macintosh)

21