Cause | Action |
The network setup of the Card Slot fails.
(Continued)
zChange the workgroup name to “WORKGROUP” following the procedure below.
(1)
(2)Select the Computer Name tab, then click Change.
(3)Change the workgroup name to “WORKGROUP”, then click OK.
If the problem is not resolved, click Skip to complete the installation without the network setup of the Card Slot. After installation is complete, to mount the Card Slot using the Canon IJ Network Tool, refer to “Using the Card Slot over a Network” in the User’s Guide
zMake sure that a memory card is inserted in the Card Slot. If it is not inserted, insert it.
Note
Depending on the Mac OS version, the authentication screen may appears. If it appears, click OK.
If the problem is not resolved, click Skip to complete the setup without the network setup of the Card Slot. To mount the Card Slot manually, refer to “Cannot Mount the Card Slot” in “Troubles When Using the Machine over Network” in “Troubleshooting” of the User’s Guide
“The Card Slot is already mapped as Network Drive to this computer.” is displayed
Cause | Action |
The Card Slot has already been mapped as the network drive.
The Card Slot is already available. Click OK to close the dialog, then click Next on the Network Setup of the Card Slot dialog box.
“Cannot map any more drives, because all the drive letters are assigned.” is displayed
Cause | Action |
All drive letters are assigned.
Click Skip to complete the setup. After software installation is complete, remove any drive letter and try the network setup of the Card Slot again using the Canon IJ Network Tool. For details, refer to “Using the Card Slot over a Network” in the User’s Guide
36Troubleshooting