Turning On the Analog-Digital Converter

Available only in the mode.

MENU

VCR SETUPAV DV OFF

( 63)

1.Press the MENU button and select [VCR SETUP].

2.Select [VIDEO INPUT] and choose a setting appropriate to the type of connection to the analog device. Press the SET button to return to the [VCR SETUP] sub-menu.

3.Select [AV DV] and set it to [ON].4.Press the MENU button.

Depending on the signal sent from the connected device, the conversion from analog to digital signals might not work properly (e.g., signals that include copyright protective signals or anomalous signals such as ghost signals).

For normal use, set [AV DV] to [OFF]. If it is set to [ON], digital signals cannot be input via the camcorder’s DV terminal.

We recommend powering the camcorder from a household power source.

Connecting the camcorder to the computer you can also use the analog-digital conversion to transfer analog recordings to your computer as digital signals. Analog-digital conversion can be performed also when connecting the camcorder to the computer using the USB cable.

The required equipment and operation is the same as when Transferring Video

Recordings to a Computer ( 118), except for step 3: In this case set the [AV DV] to [ON]. Check the setting before connecting the camcorder to the computer.

The analog-digital conversion may not operate properly depending on the software and the specifications and settings of your computer.

E

Editing

101