Step 5: Using the Wireless Controller

Inserting the Battery (Lithium Button Battery CR2025)1. Press the tab in the direction of the arrow and pull out the battery holder.
2. Place the lithium button battery

 

with the + side facing up.

Tab

 

3. Insert the battery holder.Using the Wireless Controller

Point it at the camcorder’s remote sensor when you press the buttons. A single remote sensor is located at the back of the camcorder.

The wireless controller may not work properly when the remote sensor is

subjected to strong light sources or direct sunlight.

If the wireless controller does not work, check if the remote sensor is set to [OFF ] ( 67).

When the camcorder cannot be operated with the wireless controller, or when it can only be operated in very close range, replace the battery.

22