6 Attach the top of the extension pipe to the
Secure to the extension pipe using the four supplied M5 screws.
●The open end of the pipe should face the open end of the
Direction to the screen
Direction to the screen
7 Attach the Joint fitting to the bottom of the extension pipe
Use the four M5 screws removed from the
8 Hook the Base bracket on the projections of the Joint fitting and secure it temporarily
1Hook the Base bracket on the protrusion
(A)of the Joint fitting, and secure it temporarily using the four supplied M5 screws (B).
Tighten the screws (B) after making the adjustment in "Adjusting the Projection Angle" (page 11).
2 Affix the supplied Canon logo seal. For the direction and position of the logo seal, see the refer to step 8 on page 7.
Direction to the screen
B
A
B