4 Attach the anti-fall wires

1Loosen the left and right adjusting feet of the projector.

2Pass one end of the anti-fall wire (longer wire for RS-CL10) into the square hole (A) on the Base bracket, and then fasten the other end to the right adjusting foot (B).

3Pass one end of the anti-fall wire (shorter wire for RS-CL10) into the square hole (C), and then fasten the other end to the left adjusting foot (D).

4Tighten the left and right adjusting feet to secure the anti-fall wires.

● Be sure to attach both anti-fall wires.

5 Pull cables out of the cable hole in the ceiling

6 Attach the Joint fitting to the Ceiling-mount bracket

Secure the Ceiling-mount bracket using the four M5 screws removed during preparation.

C

D

B

A

WUX10 MarkII/SX7 MarkII/SX60/X700

C

D

B

A

SX80 MarkII/SX800

Direction to the screen