Troubleshootingrouble?
If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists.
Power Source
Problem | Solution |
|
|
|
| ||
|
|
|
|
Camcorder will not turn on. | Battery pack is exhausted. Replace or charge the battery | 16 | |
| pack. |
|
|
| Attach the battery pack correctly. | 16 | |
The camcorder switches off | Battery pack is exhausted. Replace or charge the battery | 16 | |
by itself. | pack. |
|
|
| Power save function has been activated. Turn on the | 67 | |
| camcorder. |
|
|
Cassette compartment will | Battery pack is exhausted. Replace or charge the battery | 16 | |
not open. | pack. |
|
|
| Open the cassette compartment cover fully. | 19 | |
Cassette compartment | Battery pack is exhausted. Replace or charge the battery | 16 | |
stopped during loading/ | pack. |
|
|
unloading. |
|
|
|
LCD/viewfinder switches on | Battery pack is exhausted. Replace or charge the battery | 16 | |
and off. | pack. |
|
|
Battery pack will not charge. | Charge the battery pack in temperatures between 0 °C and | – | |
| 40 °C (32 °F and 104 °F). |
|
|
| Battery packs become hot with use and may not charge. Wait | – | |
| until the battery pack temperature is below 40 °C (104 °F) and |
|
|
| retry charging. |
|
|
| The battery pack is damaged. Use a different battery pack. | – | |
E
Recording/Playback
Problem | Solution |
|
|
|
| ||
|
|
|
|
Buttons will not work. | Turn on the camcorder. | 27 | |
| Load a cassette. | 19 | |
Camcorder will not focus. | Autofocus does not work on that subject. Focus manually. | 48 | |
| Adjust the viewfinder with the dioptric adjustment lever. | 21 | |
| Lens is dirty. Clean the lens. | 137 | |
Viewfinder picture is blurred. | Adjust the viewfinder with the dioptric adjustment lever. | 21 | |
A vertical light bar appears on | Bright light in a dark scene may cause a vertical light bar | – | |
the screen. | (smear) to appear. This is not a malfunction. |
|
|
Abnormal characters appear | This camcorder uses a microcomputer. External noise or static | – | |
on the screen. The camcorder | electricity may cause abnormal characters to appear on the |
|
|
does not operate properly. | screen. In such case, disconnect the power source and |
|
|
| reconnect it after a short time. If the problem still persists, |
|
|
| disconnect the power source and press the RESET button |
|
|
| with a pointed item. Pressing the RESET button resets all |
|
|
| settings. |
|
|
“ ” flashes on the screen. | Load a cassette. | 19 | |
“ ” flashes on the screen. | Battery pack is exhausted. Replace or charge the battery | 16 | |
| pack. |
|
|
“ ” flashes on the screen. | Condensation is detected. See reference page. | 128 | |
“ ” flashes red on the screen. | The camcorder malfunctions. Consult a Canon Service | – | |
| Center. |
|
|
Trouble?
125
