Special Modes for Other Purposes
• Even if your face is not detected after you join the others in the shooting area, the camera will shoot about 15 seconds later.
•To change the number of shots, press the <o><p> buttons after choosing [
] in step 1. [Blink Detection] (=131) is only available for the final shot.
• You can also choose the shooting mode by choosing [ 
] in steps 1 – 2 on
=137, touching [
] to access the setting screen, touching [
], and then touching the same item or [
].
Still Images
You can shoot a series of shots in rapid succession by holding the shutter button all the way down. For details on the continuous shooting speed, see “Specifications” (=333).
HQ: High Quality
1Choose [
].
zzFollow steps 1 – 2 on =137 and
choose [
].
2 Shoot.
XXHold the shutter button all the way down to shoot continuously.
zzShooting stops when you release the shutter button or reach the maximum number of shots, after which [Busy] is displayed and the shots are shown in the order you took them.
• Focus, image brightness, and color are determined by the first shot.
• The screen is blank while you are shooting.
•There may be a delay after continuous shooting before you can shoot again. Note that some types of memory cards may delay your next shot even longer.
•Shooting may slow down depending on shooting conditions, camera settings, and the zoom position.
158