Canon S2 IS Sound-OnlyRecording (Sound Recorder), SET, button, press the SET button, 1Select [Sound Recorder] from the [ (Play)] menu, and

z You cannot record or playback sound memos for images that already have an incompatible sound file attached. If you attempt to record or play such images, the "Incompatible WAVE format" message will display. Incompatible sound files can be deleted with this camera.

z Sound memos for protected images cannot be erased (p. 121).

‹ The volume can be adjusted in the Set up menu (p. 79).

‹ If you set [Mute] to [On] in the Set up menu, no sound is reproduced, however, you can resume the sound and adjust the volume by pressing the S or T button.

Sound-Only Recording (Sound Recorder)

You can record sound only, without images, for up to two hours at one time.

1Select [Sound Recorder] from the [ (Play)] menu, and

press the SET button.

See Selecting Menus and Settings (p. 73).

2Use the W or X button to select [z] (Record) from the Sound Control Panel and press the SET

button.

z The recording starts and the elapsed time is displayed.

Available Recording Time

z Sound Mode Settings (p. 68)

z Press the SET button again to stop Sound Control Panel recording.

Pressing the shutter button halfway, or pressing the movie button will also stop recording.

‹ The maximum recording time depends on the space available on the memory card, and the sound mode.

‹Recording stops when the memory card is full.

‹From the Playback mode, the Sound Control Panel can be displayed by holding the button.

116