Basic Functions
29
Using the LCD Monitor
The LCD monitor can be used to compose images while shooting,
adjust settings menus and replay images.
•The image in the LCD monitor will darken in strong sunlight
or bright light. This does not constitute a malfunction.

Shooting Mode

(, , and on the mode dial)
•The LCD monitor turns on or changes
the display mode as follows with each
press of the button.
Standard (No Information)
Detailed (Information View)
Off
•The LCD monitor setting (On or Off) is saved by the camera
when the power is turned off so that the same setting is
automatically available when the power is turned on again.
However, the setting may be lost when the power has been
turned off after the “Change the battery pack” message has
displayed, while the LCD monitor was on in shooting mode.
•In the or mode, the LCD monitor turns on regardless
of its On/Off setting.
•Set the flash to [On] or affix the camera to a tripod when
the upper indicator flashes orange and the camera blur
warning icon ( ) appears in the LCD monitor after the
metering preparations are complete.
▼
▼
▼
*EC118usCUGE_027-044,GM 2/25/02, 2:45 PM29