Appendices
143
•Change the shooting angle.
•Set the flash to [Off].
•Set the flash to [On].
•Set the video system to the
appropriate setting, NTSC or
PAL, for your TV (p. 118).
•The output will not appear on a
TV monitor in (Stitch Assist)
mode. Shoot in a different
mode.
•Adjust the zoom before
shooting a movie.
Problem Cause Solution
Subject in recorded
image is too bright
Flash does not fire
Image not showing
on TV monitor
Zoom does not
work
Light is shining
directly on the
subject or reflected
off the subject into
the camera
Flash is set to on
Flash is set to off
Incorrect video
system setting
Shooting mode set
to (Stitch
Assist)
Zoom button
pressed during
movie recording
*EC118usCUGE_137-152,GM 2/25/02, 2:59 PM143