46
Shooting
Reviewing an Image Right after Shooting
Right after a shot is taken, the image appears in the LCD monitor for 2
seconds even if you release the shutter button regardless of whether the LCD
monitor is on or off. You can also review it with the following procedures.
•By keeping the shutter button pressed after a shot.
•By pressing the button while the image is displayed on the LCD
monitor. Press the shutter button halfway to stop displaying it.
• You can do the following while the image is displayed.
- Check the image brightness in the histogram (p. 32).
- Erase the image (p. 91).

Changing the Review Duration

The default review time is 2 seconds. The review function can be set to
Off or changed to 10 seconds.
•See
Selecting Menus and Settings
(p. 37).
•Use the or button to select [Off],
[2 sec.] or [10 sec.]
•With the Off option, the image will not
automatically display. However, if you
keep the shutter button fully pressed
after a shot, the image will display.
•With the 2 sec. or 10 sec. options, the
image automatically displays for the set
duration even if the shutter button is
released.
•You can display the image longer than
the 2- or 10-second duration by
keeping the shutter button depressed
or by pressing the button while the
image is displayed.
•Another picture can be taken even
while the last is displayed.
•The display will return to the Rec. menu.
In the (Rec.) menu,
select .
*EC118usCUGE_045-061,GM 2/25/02, 2:46 PM46